Ear Dangle Combo
Designer www.wigjig.com
Skill Level Beginner

Materials

20 gauge Soft Flex Craft Wire (any color)
Accent Beads (your choice)

Tools

WigJig Olympus
5/16" Round Super Pegs
Wire Whacker
Nylon Jaw Pliers
Cutters
Burr Cup

Instructions

Step 1: Using the WigJig Olympus and 20G wire, follow the arrows to make the earing. Clip wire tail, and harden/flatten using the Wire whacker and/or nylon jaw pliers.




Step 2: Grasp ear wire inside nylon jaw pliers and hold dangle in fingers. Rotate 90 degrees to properly orient ear wire.

Step 3: File tip of ear wire with cup bur or metal file to finish. Add beads,if desired. Make a second "mirror image" earing.



Step 4: Using 20G wire, form a spiral using the spiral maker at one end of the wire. Place spiral on the WigJig Olympus,and follow the arrows to make the earing. Clip wire tail,and harden/flatten using the Wire whaker and/or nylon jaw pliers. Grasp ear wire inside nylon jaw pliers,hold dangle in fingers, and rotate 90 degrees to orient ear wire. File tip ear wire with cup bur or metal file to finish.Make a second"mirror image"earing.Thread beads onto ear wire,if desired. Lock beads in place by following instructions for "Wrapping a bead on wire with coils".



Step 5: Using the WigJig Olympus and 20G wire,follow the arrows to make the earing. Clip wire tail, and harden/flatten using the Wire Whacker and/or nylon jaw pliers. Thread beads onto ear wire,if desired.Grasp ear wire inside nylon jaw pliers and hold dangle in fingers. Rotate 90 degrees to properly orient ear wire. File tip of ear wire with burr cup to finish. Make a second "mirror image" earing.



Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.