Leaves and Berries
Designer Jamie Hogsett

Skill Level Intermediate

Materials

20 gauge Purple Soft Flex Craft Wire - 1 spool
20 gauge Green Soft Flex Craft Wire - 1 spool
20 gauge Brown Soft Flex Craft Wire - 1 spool
18mm Copper Plated Square Toggle Clasp - 1 set
8mm Opaque Jonquil Vintage Lucite Rounds from Beadin' Path - 8 pcs
8mm Muted Light Lavender Moonglow Vintage Lucite Side-Drilled Button Rounds from Beadin' Path - 9 pcs
16mm Matte Dark Emerald Lucite Beech Leaves from Beadin' Path - 8 pcs

Tools

Cutters
Flat Nose Pliers
Round Nose Pliers
Chain Nose Pliers

Instructions

Finished Size: 6 3/4"

Step 1:
Use 5" of Green wire to form a wire wrapped loop that attaches to 2 leaves, making sure to place the beads back to back. Use the other end of the wire to form another wire wrapped loop, wrapping the wire around the coil of wire formed with the previous wire wrapped loop. Repeat three times for a total of four leaf dangles. Set aside.

Step 2: Use 5" of Purple wire to form a wire wrapped loop that attaches to 3 button rounds, beginning by forming an 8mm loop that will hold all three beads. Use the other end of the wire to form another wire wrapped loop, wrapping the wire around the coil of wire formed with the previous wire wrapped loop. Repeat twice for a total of three button dangles. Set aside.

Step 3: Use 3" of wire to form a wire wrapped loop that attaches to the bar half of the toggle clasp. String 1 round and form a wire wrapped loop that attaches to 1 leaf dangle.

Step 4: Use 3" of wire to form a wire wrapped loop that attaches to the previous dangle. String 1 round and form a wire wrapped loop that attaches to 1 button dangle.

Step 5: Repeat Steps 3 and 4 twice. Repeat Step 3.

Step 6: Use 3" of wire to form a wire wrapped loop that attaches to the previous dangle. String 1 round and form a wire wrapped loop that attaches to the ring half of the toggle clasp.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.