Blooming Rose Multi-Strand Necklace
Designed by: Virginia Magdaleno
Skill Level: Beginner

Materials:

• Soft Flex® Wire, .024 Diameter, Original Steel Tone - 1 spool
• Sterling Silver Renaissance Connectors
• 2mm x 3mm Sterling Silver Crimp Tubes
• Sterling Silver Woven Toggles
• 4mm Black Tourmalines
• 6mm Black Tourmalines
• 9mm Black Tourmalines
• Thai Silver Bloom
• Thai Silver Small Flower
• Thai Silver large Flower

Tools:

• Soft Flex® Professional Flush Cutter
• Bead Crimping Pliers

Instructions:

1. Cut three lengths of Sterling Silver Extreme 925 Flex Wire .024/Heavy: 10in, 14in and 20in
2. Attach the 10in length of wire to the first loop in a row of the Connector using a 2x3 Crimp Tube
3. Repeat step 2 for the second and third wire; Be sure the longest wire is attached to the last of the three Connector holes
4. String 11-4mm Black Tourmalines, 1 Thai Silver Bloom, 44-4mm Black Tourmalines onto the 10in length of wire; Attach to the first loop of the Connector with a 2x3 Crimp Tube.
5. String 12-6mm Black Tourmalines, 1 Thai Silver Small Flower, 28-6mm Black Tourmalines onto the 14in length of wire; Attach to the middle loop of the Connector with a 2x3 Crimp Tube
6. String 11-9mm Black Tourmalines, 1 Thai Silver Large Flower, 20-9mm Black Tourmalines; Attach to the last loop of the Connector with a 2x3 Crimp Tube
7. Crimp a 5in length of Sterling Silver Extreme 925 Flex Wire .024/Heavy to the final, single loop of the Connector; String 10-6mm beads; Crimp to the woven toggle
8. Repeat on other side

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.