Holy Bat Earrings
Designer Jessica L. Rosenfeld
Skill Level Intermediate


Black Soft Flex Beading Wire .019 diameter - 30"
Teeny Tiny Black Ceramic Bat Beads - 6 pcs
2x2mm Sterling Silver Crimp Tubes - 12 pcs
Sterling Silver Leverback Earwires - 1 pair
4mm Clear Czech Glass Faceted Beads - 12 pcs
6mm Sterling Silver Split Rings - 2 pcs


Crimping Pliers


Step 1: Cut 2-4" lengths, 2-5" lengths, and 2-6" lengths of Soft Flex Wire from the spool.

Step 2: Crimp a crimp tube at the bottom of each of the 6 strands, using crimping pliers.Cut off any excess wire below the crimp using Flush Cutters.

Step 3: On each of the 6 strands, place one clear Czech glass bead, one Ceramic Bat, and one clear Czech glass bead.

Step 4: Starting with the shortest strand, place other end of wire through a crimp tube, through the split ring, and back through the crimp tube. Once desired length is measured (I have made my shortest 3"), secure crimp using crimping pliers.

Step 5: Repeat step 4, only making the length longer (I have my middle strand 4" long).

Step 6: Repeat step 4 for the longest length (mine is 5" long).

Step 7: Place split ring, which should have 3 graduated lengths of Soft Flex, through leverback earwire, into notch where it will stay in place.

Step 8: Repeat steps 4-7 for other earring.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.