Loop d' Loop Choker
Designer Martina Valdivia
Skill Level Intermediate

Materials

24k Gold Plated Extreme Wire .019 diameter - 100"
2x2mm Gold Filled Crimp Tubes - 4 pcs
Gold Filled 2 Strand Clasp - 1 set
5-7mm Czech Glass Beads - 64 pcs

Tools

Crimping Pliers
Cutters

Instructions

Step 1: Cut two 50" pieces of wire.

Step 2: Use one wire to string 1 crimp tube and the first loop of one half of the clasp. Pass back through the tube and crimp. Repeat to attach the second wire to the second loop of the same half of the clasp.

Step 3: Use the first wire to string 1 bead. Use the second wire to form a loop around the bead by crossing over the first wire below the bead, under the first wire above the bead, then parallel to the first wire. Repeat entire step, stringing the bead on the second wire and using the first wire to form the loop.

Step 4: Repeat Step 3 thirty-one times.

Step 5: Use one wire to string 1 crimp tube and one loop of the second half of the clasp. Pass back through the tube and crimp. Repeat with the other wire and the other loop of the clasp.


Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.