Maggie Mae Bracelet
Designed by: Sandy Dufford and Darlene Rios
Skill Level: Beginner

Materials:

• Soft Touch™ Wire .019 Diameter - 7-8 inches
• 2mmx2mm Sterling Silver Crimp Tubes - 2 crimps
• 3mm Deep Red Czech Glass Beads - 20 beads
• Sterling Silver Square Bead Frame - 5 bead frames
• Venetian Red w/Foil Lampwork Beads - 4 beads
• 5mm Round Sterling Silver Beads - 5 beads
• 3mm Round Sterling Silver Beads - 10 beads
• Ball Lock Clasp - 1 clasp

Tools:

• Crimping Pliers
• Soft Flex® Professional Flush Cutter
• Bent Nose Pliers

Instructions:

1. Cut approximately 7" or 8" of Soft Touch .019 wire from the spool. String one sterling silver crimp tube, then one side of your clasp, and then put the wire back through the crimp. Secure using crimping pliers. Cut off excess wire using Flush Cutters.
2. String beads as follows: 1- 3mm Sterling Silver Round Bead and 2 Deep Red Czech Glass Beads.
   
3. Next, put wire through one end of a Bali Silver Bead Frame, and using bent nose pliers, pull wire through middle of the bead frame, then string 1 -5mm Sterling Silver Round bead, then back through the middle of the bead frame and out of the other hole. Sterling Silver bead should be in the middle of the bead frame, with the wire going through both.
4. Next, string 2 Czech Glass beads, 1- 3mm Silver bead, 1 Venetian Foil Bead, 1- 3mm Silver bead, and 2 Czech Glass beads.
5. Repeat steps 3 and 4 four times.
6. Repeat step 3 once more. Then string 2 Czech Glass beads and 1-3mm Silver bead.
7. String 1 sterling silver crimp tube on wire, through the other end of the toggle, then back through the crimp. Pull the wire tight, but with enough slack for wire to move around using bent nose pliers. Secure crimp using crimping pliers. Cut off excess wire using Flush Cutters.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.