BeJeweled Necklace
Designer Mechelle Carlson
Skill Level Beginner


24k Gold Plated Extreme Wire .014 diameter - 18"
2x2mm Gold Filled Crimp Tubes - 12 pcs
Gold Filled Small Filigree Fishhook Clasp - 1 set
Large BeJeweled Crysoprase w/Ruby Briolette Bead - 1 pc
Medium BeJeweled Crysoprase w/Ruby Briolette Bead - 2 pcs
Small BeJeweled Crysoprase w/Ruby Briolette Bead - 2 pcs


Crimping Pliers
Measuring Tape or Ruler


Step 1: Cut off about 18 inches of Soft Flex® Extreme 24k Gold Plated Wire and find the center. Place a crimp tube and secure using crimping pliers.

Step 2: String Large Briolette and then another crimp tube, and secure it using crimping pliers.

Step 3: Measure about one inch from the end of the crimp and add another crimp, secure it, then string Medium Briolette, then another crimp and secure.

Step 4: Do the same on the opposite side of the necklace.

Step 5: Repeat steps 3 and 4, instead using Small Briolettes. Be sure to check the Briolettes to make sure the Rubies are all facing the same way.

Step 6: In front of a mirror, put unfinished necklace around neck to determine the best length.

Step 7: String a crimp, then one side of the clasp and string wire back through crimp and secure. Repeat for other side of clasp.

Step 8: Cut off any excess wire using Soft Flex® Razor Flush Cutters.

Projects not intended for children under the age of 13. The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. Soft Flex® Company disclaims all liability from any injury to anyone undertaking the construction of this project as a result of improper safety precautions.